to change the position of the source coin and target coin or vice versa.
**Step 2**
* Select target coin (3) --> The number of coins you will receive (4) corresponds to the type of source coin you want to swap according to the rate shown at (6).
**Step 3**
* Press the “Swap” button --> Redirect to the Exchange screen.
**Note**: You can only SWAP from FRTS to ETH or BTC, from ETH to FRTS, and from BTC to FRTS.
**Step 4**
* If the Source Coin is FRTS and the Target Coin is ETH or BTC then display “Buy (FRTS --> coin)”
* If Source is coin (ETH/BTC) and Destination is Fruits then display “Sell (coin --> Fruits)”
* Press the Buy/ Sell button: Successfully create a Swap order
* If after a period of time, the user has not confirmed the swap but the swap rate changes, when pressing the button, the error message "Create swap failed, please try again" is displayed.
 
**Note:** Includes the following fees
* Transaction fee:
* There is no fee to convert from FRTS to BTC/ETH.
* Transaction fees from ETH/BTC to FRTS are automatically updated according to the exchange.
* Swap fee: fee for swap
# Cancel Swap
**Condition:**
* Only when switching from FRTS to TFSTs and vice versa.
* Swap orders with FRTS/TFSTs are locked
**Step 1**
* From the "Juice-DEX" screen, click on the icon  --> Redirect to "Open Swap Orders" screen. \
**Step 2**
* Pressing the "Cancel" button shows the "Cancel Swap" popup. 
**Step 3**
* Press the "Yes" button --> Cancellation confirmed
* The user needs to wait a few minutes for the system to confirm the transaction.
* After the network confirms the successful transaction, the locked amount of FRTS/TFSTs is available.
* The system automatically refunds the swap fee to the user.
* The swap order is no longer displayed in the list of swaps that are locked FRTS/ TFSTs.
# Governance
# Propose
# Proposal Type
| Proposal Type | Proposal Creating Condition | Proposal Voting Condition | Success Condition | Voting Time |
|---|---|---|---|---|
| Blockchain Core | Own more than 100,000,000 FRTS and more than 5,000,000 GT | Own at least 1,000,000 GT | more than 2/3 vote for the proposal and at least 200,000,000 GT (50% of total supply) have voted | 90 days |
| Finance Fund control | Own more than 50,000,000 FRTS and more than 500,000 GT | Own at least 1,000,000 GT | more than 2/3 vote for the proposal and at least 200,000,000 GT (50% of total supply) have voted | 60 days |
| Process /Service project audit | Own more than 1,000,000 FRTS and more than 100,000 GT | Own at least 10,000 GT | more than half vote for the proposal and at least 120,000,000 GT (30% of total supply) have voted | 30 days |
| Donation Fruits Station | Own more than 10,000 FRTS and more than 1,000 GT | Own at least 1,000 GT | more than half vote for the proposal and at least 120,000,000 GT (30% of total supply) have voted | 15 days |
| Information Web/UI/UX | Own more than 10,000 FRTS and more than 100 GT | Own at least 100 GT | more than half vote for the proposal and at least 40,000,000 GT (10% of total supply) have voted | 15 days |
| Period | Description |
|---|---|
| 1 | Pending: When a governance proposal is created, it enters a 2 day review period. The FRUITS Organization considers to approve or reject the proposal. Active: Proposal is approved by FRUITS Organization Rejected: Proposal is rejected by FRUITS Organization. |
| 2 | Proposals with Active status will enter Voting period. |
| 3 | Queued: if the proposal meets the approval conditions, it will be in the queue for execution. Or Defeated: The opposite of “Queued” - the proposal failed to meet the approval conditions. |
| 4 | Executed: FRUITS Organization designates proposal execution. Or Expired: If after 30 days of waiting, FRUITS Organization has not specified execution, the proposal expires and the result is not valid. |
to access the Staking page.
**Step 2**
* Select an asset you wish to stake: choose FRTS (default)
**Step 3**
* Select a reward plan, including 3 packages:
* 3 months plan, 1.5% APR (default)
* 6 months plan, 3% APR
* 1 year plan, 5% APR
Note: Users will have to pay additional Staking fees.
**Step 4**
* Enter the amount (FRTS) you want to stake. 
**Step 5**
* The system will check the inputted value.
* The “confirm” button will be enabled once your asset is validated (your assets must be sufficient to secure the staking deposit and transaction fee (if any))
* Press the “Confirm” button --> Display the “Staking Donation” screen. 
On the Staking Donation screen, users can donate part of their rewards after their staking has been completed.
**Step 6**
Select donation plan
* Choose donation amount: 30%, 40% or 50%.
* Or enter the specific value you want to donate.
* Or no donation.
**Step 7**
Select a charity that you would like to donate to:
* Anything Charity (FRUITS organization will select a project).
* Or you can select the project you wish to donate to.
**Step 8**
* The system will validate the inputted value**.**
* The “Confirm” button will become enabled once validated (must select the
donate plan).
* Press the “Confirm” button --> Display the “Confirm Staking Plan” popup. 
On the "Confirm Plan Staking" screen, check the displayed information:
* Amount: Number of applied funds for staking
* Staking Plan (Lock Time): Staking Period
* APR: Annual Percentage Rate for your Staking
* Staking Fee: Fee for Staking
* Fee: Transaction Fee
* Donation Amount: Your selected donation amount
* Selected Charity: Charity you're donating to.
**Step 9**
* Once you finish checking the Confirm Plan Staking information, press the “OK” button --> Redirect to the screen containing the user's stake information. 
**Step 10**
* Staking is completed, press the “Back to Home” button to return to the “Home” screen.
# Staking Bitcoin
To stake BTC, please follow the steps below:
**Step 1**
* From the Home Screen, on the navigation bar, press 
to access the Staking page
**Step 2**
* Select an asset you wish to stake: choose BTC 
**Step 3**
* Select a reward plan, including 3 packages:
* 3 months plan, 1.5% APR (default)
* 6 months plan, 3% APR
* 1 year plan, 5% APR
**Note**: The system automatically updates transaction fees. Users will have to pay additional transaction fees and staking fees.
**Step 4**
* Enter the amount (BTC) you want to stake.
**Step 5**
* The system will check the inputted value.
* The “confirm” button will be enabled once your asset is validated (your assets must be sufficient to secure the staking deposit and transaction fee (if any))
* Press the “Confirm” button --> Display the “Staking Donation” screen. 
On the Staking Donation screen, users can donate part of their rewards after their staking has been completed.
**Step 6**
Select donation plan
* Choose donation amount: 30%, 40% or 50%
* Or enter the specific value you want to donate.
* Or no donation.
**Step 7**
Select a charity that you would like to donate to:
* Anything Charity (FRUITS organization will select a project).
* Or you can select the project you wish to donate to.
**Step 8**
* The system will validate the inputted value.
* The “Confirm” button will become enabled once validated (must select the donate plan).
* Press the “Confirm” button --> Display the “Confirm Staking Plan” popup. 
On the Confirm Plan Staking, check the displayed information:
* Amount: Number of applied funds for staking
* Staking Plan (Lock Time): Staking Period
* APR: Annual Percentage Rate for your Staking
* Staking Fee: Fee for Staking Fee: Transaction Fee
* Donation Amount: Your selected donation amount
* Selected Charity: Charity you're donating to.
**Step 9**
* Once you finish checking the Confirm Plan Staking information, press the “OK” button --> Redirect to the screen containing the user's stake information. 
**Step 10**
* Staking is completed, press the “Back to Home” button to return to the “Home” screen.
# Staking Ethereum
To stake **ETH**, please follow the steps below:
**Step 1**
* From the Home Screen, on the navigation bar, press to access the Staking page
**Step 2**
* Select an asset you wish to stake: choose ETH 
**Step 3**
* Select a reward plan, including 3 packages:
* 3 months plan, 1.5% APR (default)
* 6 months plan, 3% APR
* 1 year plan, 5% APR
**Step 4**
* (3) Default Fee is estimated at “Medium”.
* You can select the fee by pressing “Advanced” (the higher the
fee, the faster the transaction processing time).
* Users will have to pay additional staking fees. 
**Step 5**
* Enter the amount (ETH) you want to stake.
**Step 6**
* The system checks the input value.
* If it is valid (your assets must be sufficient to secure the staking deposit and transaction fee (if any)), the “Confirm” button is enabled.
* Press the “Confirm” button --> Display the “Staking Donation” screen. 
On the Staking Donation screen, users can donate part of their rewards after their staking has been completed.
**Step 7**
* Select donation plan
* Choose donation amount: 30%, 40% or 50%
* Or enter the specific value you want to donate.
* Or no donation.
**Step 8**
* Select a charity that you would like to donate to:
* Anything is fine (FRUITS organization will select a project).
* Or you can select the project you wish to donate to.
**Step 9**
* The system will validate the inputted value.
* The “Confirm” button will become enabled once validated (must select
the donate plan).
* Press the “Confirm” button --> Display the “Confirm Staking Plan” pop-up.
On the Confirm Plan Staking, check the displayed information:
* Amount: Number of applied funds for staking
* Staking Plan (Lock Time): Staking Period
* APR: Annual Percentage Rate for your Staking
* Staking Fee: Fee for Staking Fee: Transaction Fee
* Donation Amount: Your selected donation amount
* Selected Charity: Charity you're donating to.
**Step 10**
* Once you finish checking the Confirm Plan Staking information, press the “OK” button --> Redirect to the screen containing the user's stake information. 
**Step 11**
* Staking is completed, press the “Back to Home” button to return to the “Home” screen.
# Staking Information
On this screen, users can review the staking information that they have successfully registered for Staking.
* Displays the coin and reward the user has registered for staking.
* The smart contract address that receives the staking amount from the user. Press 
--> copy the smart contract address to the clipboard.
* Look confirmed. Your staking will start in about 5 minutes. 
# Staking History
* From the Staking screen, press the icon 
--> Redirects to the user's Staking History. 
* Press the Transaction ID of the corresponding record --> Redirects to the Transaction Details screen.
On the Transaction Details screen:
* FRTS: View details of FRUITS coin's staking transaction.
* BTC: Press the “View full transaction on Blockchain.com” link --> Redirects to transaction details on the website: 
icon.
**Step 2**
* Click on the Lending option to access the Lending page.
**Step 3**
* (1) Choose an asset to lend.
**Step 4**
* (2) Select a reward plan.
* Click “View project information” to view details.
* Note:
* Users will have to pay additional lending fees and transaction fees (if your lending asset is BTC or ETH coins). 
* In transactions with BTC and ETH coins:
* The system automatically updates transaction fees.
* Default Fee is estimated at “Medium”. You can select the fee by pressing “Advanced” (the higher the fee, the faster the transaction processing time).
**Step 5**
* (3) Enter the amount you want to lend. 
**Step 6**
* The system will check the inputted value.
* The “confirm” button will be enabled once your asset is validated (your assets must be sufficient to secure the lending deposit and transaction fee (if any)).
* Press the “Confirm” button → “Lending Donation” screen will be displayed.
On the Lending Donation screen, users can donate part of their rewards after their lending has been completed. 
**Step 7**
* Select donation plan (1)
* Choose donation amount: 30%, 40% or 50%
* Or enter the specific value you want to donate.
* Or no donation.
**Step 8**
* Select a charity that you would like to donate to (2):
* Any Charity (FRUITS organization will select a project).
* Or you can select the project you wish to donate to.
**Step 9**
* The system will validate the inputted value.
* The “Confirm” button will become enabled once validated (must select the donate plan)
* Press the “Confirm” button --> Displays the “Confirm Lending Plan” pop-up. 
On the Confirm Lending Plan, check the displayed information:
* Amount: Number of applied funds for lending
* Project name
* Lending Plan (Lock Time): Lending Period
* Lending Fee: Fee for Lending
* Fee: Transaction Fee
* Donation Amount: Your selected donation amount
* Selected Charity: Charity you're donating to
**Step 10**
* Once you finish checking the Confirm Lending Plan information, press the “Submit” button --> Redirects to the screen containing the user’s lending information. 
**Step 11**
* Lending is completed, press the “Back to Home” button to return to the “Home” screen.
# Lending Information
On this screen, users can review the lending information that they have successfully registered for lending yield farming.
* It displays the coin and rewards the user has selected for lending.
* The smart contract address that receives the lending amount from the user. Press --> copy the smart contract address to the clipboard.
* Look confirmed. Your lending will start in about 5 minutes. 
# Lending History
* From the Lending screen, press the icon 
--> Redirects to user’s lending history. 
* Press the Transaction ID of the corresponding record --> Redirects to the Transaction Details screen.
* On the Transaction Details screen:
* FRTS: View details of FRUITS coin's lending transaction.
* BTC: Press the “View full transaction on Blockchain.com” link --> Redirect to transaction details on website: 
**Step 3**
* Enter 6 digits to create a passcode. 
**Step 4**
* Re-enter to confirm the passcode. 
**Step 5**
* If re-enter correctly --> Create passcode successfully. Users continue to create/import wallets.
* If re-enter incorrectly --> Return to Step 3 to re-create passcode.
***Note:***
* Users can tap "SKIP" if they don't want to use the security lock.
* If the app already has a wallet and passcode but the user deletes all wallets, they must create a new passcode when accessing the app to create or import a wallet.
# Had wallet (The user updates app)
* Condition: The app already has a wallet (The user updates the app).
* When the user has installed the app and updated the app to the version with the security function, please follow the steps below to create a passcode.
**Step 1**
* Open the app --> The "Create Passcode" screen will be displayed. 
**Step 2**
* Enter 6 digits to create a passcode.
**Step 3**
* Re-enter to confirm the passcode. 
**Step 4**
* If re-enter correctly --> Create passcode successfully and redirect to the Home screen. 
* If re-enter incorrectly --> Return to Step 3 to re-create passcode.
***Note:***
* Users can tap on "SKIP" if they don't want to use the security lock.
* If the app already has a wallet and passcode but the user deletes all wallets, they must create a new passcode when accessing the app to create or import a wallet.
# Security Authentication
# Allow Permissions
## **Option 1**
* After creating the passcode, the user uses the passcode for the first time. The app requires the device's permission to use biometrics.
* Display a popup request for the app to access biometrics:  
* If the user allows it, they can use biometrics (Face ID/Fingerprint) for authentication.
* Otherwise, they can only use a passcode.
* Note:
* Depending on how the device supports security, if the device does not have biometric security, the user can only use the passcode.
* After granting permission, the next time, the user can use biometrics (Face ID/Fingerprint) or a passcode to authenticate.
## Option 2
* Users can access the device's settings to grant permission to the application.
# Face ID Authentication
* Condition: passcode is enabled, and the app allowed biometric authentication.
* To access the function, please follow the steps below.
**Step 1**
* A Glance at the screen of the user's device, and Face ID will detect the face. 
**Step 2**
* If the face is recognized --> Authenticate successfully. Users can access the app. 
* If the face is not recognized, let's try again. 
* If the face is not recognized many times, depending on the device, the user must enter the passcode to authenticate. 
# Fingerprint Authentication
* Condition: passcode is enabled, and the app allowed biometric authentication.
* To access the function, please follow the steps below.
**Step 1**
* The user touches the fingerprint sensor to authenticate. 
**Step 2**
* If the fingerprint is not correct, the warning "Not recognized" will be displayed. Users touch the fingerprint sensor to try again. 
* If the fingerprint is incorrect several times in a row, the fingerprint icon will be disabled and reopened after 1 minute. Users can only enter a passcode for authentication. 
***Note:***
* Tap PIN, if users want to enter the passcode for authentication. 
* Tap the fingerprint icon, if users want to use fingerprint for authentication (by default). 
# Passcode Authentication
* Condition: passcode is enabled.
* To access the function, please follow the steps below.
**Step 1**
* Enter passcode. 
**Step 2**
* If the user enters correctly --> Go to the Home screen. 
* If the user enters incorrectly five times in a row, the application will be locked. 
* After 30 seconds, the user can continue to enter the passcode. There is no limit to the number of times the user enters incorrectly so that the user can enter continuously.
* If the users still do not enter correctly, they must remove and reinstall the app.
# Table of content
* Warning
* Update Explanation
* Account
* Create Fruits-Coin Wallet
* Introduction about “Export Passphrase” & “Transfer to Multi-coin”
* Import Wallet
* FRUITS Wallet Address
* Set Language
* Set Currency
* NFTs
* Transaction
* Send
* Request Amount
* Transactions
* Juice DEX
* Swap
* Governance
* Propose
* Vote
* Staking
* How to Stake
* Staking Information
* Staking History
* Lending
* Yielding Farming
* Donation Fi
# Warning
* Before updating your wallet, please make sure you have your current wallet address passphrase in a safe and secure location
* It is your responsibility to have it copied and secured because just like any other cryptocurrency wallet, we do not have access to your wallet
# Update Explanation
* This update divides the Fruits Wallet Addresses into 2 types
1. FRUITS-Only Wallet
2. FRUITS Multi-Coin Wallet
* The old wallet address will automatically become a “FRUITS-Only Wallet”, so if you are a user who is logged out from their account then please make sure to import your FRUITS-Only Wallet.
* Users are also required to “create account” in order to have access to the new FRUITS Multi-Coin Wallet where you will be able to have access to Bitcoin (BTC) & Ethereum (ETH)
# Account
# Create FRUITS-Coin Wallet
# Language Setting
**Step 1**
* Access the URL below: [https://fwallet.net/](https://testnet.fwallet.net/)
**Step 2**
* Choose Language you want
to copy passphrase --> After copying the password, users can paste it somewhere safe, so that they can later use it to recover their wallet easily.
